How To Set Drag On A Baitcaster

You can use a stationary object to help yous set the elevate. You lot'll need something solid like a vehicle or fence. Tie a claw to the stop of your fishing line and hook the bumper of the car or a subclass on the fence. Pull against the stationary object while you accept the rod loaded up, adjusting the drag on your baitcasting reel until it is difficult to pull line from the reel, but non so hard that the line breaks. This method volition let you to have the drag prepare to the maximun, using the bend of the rod while fighting a fish.

Trying to gear up the drag by simply pulling the line off of the reel doesn't requite you the proper seting. I normanly but place the lure with the line tied on to the ground and then place my foot upon the line. I and so reel up untill the line is tight. And then I tighten the drag while I load up the rod with a bend in the tip surface area. Keeping pressure untill the elevate locks, then just backing off untill I have a smooth pulling elevate. This way the elevate will be set properly while fighting a fish when the rod tip is bowed. If you demand to loosen the drag just point the rod tip straight towards the fish. This lets the elevate pull off of the reel much easier.

Provided you lot account for the curve in the rod there's no reason why line stripping wouldn't work, and information technology doesn't involve stepping on your line, or $20+ lures.

I put mine in a rod holder and pull the line to set mine.

Also, I adopt to have the power to play the fish straight, so I prepare it a footling lighter than "max" and plume the spools with my thumb or fingers, depending on style of reel.

That manner I can adjust the tension on the fish on the fly, making him work for it a little more during the softer runs, while letting him run during the more powerful ones.

Provided you account for the curve in the rod there'southward no reason why line stripping wouldn't work, and it doesn't involve stepping on your line, or $20+ lures.

I put mine in a rod holder and pull the line to set mine.

Also, I prefer to have the ability to play the fish straight, so I set up it a little lighter than "max" and plume the spools with my thumb or fingers, depending on manner of reel.

That mode I can adjust the tension on the fish on the fly, making him piece of work for it a trivial more than during the softer runs, while letting him run during the more powerful ones.

Yeah I agree with you. Only some other way of adjusting the tension on the drag. It's just a personal choice that people many use. The betoken that I was trying to brand is to employ the parabolic curve of the rod in conjunction with the drag tension. Yes one can feather the line to help in the drag tension.

Except the curve in the rod volition have no upshot on the real tension on the drag organization on the reel. Y'all can pull directly off the reel or use the bend in the rod and the drag tension/weight is nonetheless the same. The rod bend acts as a shock cushion, it has trivial to exercise with the drag off the reel.

A much better way is to put your rod in a holder and use a hand held calibration to set the drag weight. Usually 25 to 33 percent of the line or leader rating.

If you lot fish with a lot of line out call up that the drag tension goes upwardly equally the amount of line on the spool gets smaller. Its all about the leverage on the spool existence less thus the amount of pull/torque required to take line off the reel increases. Then yous should never increment the drag or thumb your spool with a lot of line off the reel. Meliorate to decrease drag and chase the fish if necessary.

Of grade if y'all are flipping jigs with threescore# braid, drag does not thing.

I was taught to set the elevate depending on the lure you're using. Should exist tight plenty for the lure to slowly fall to the footing when you hitting the spool release. This has helped me avoid the dreaded birds nest TREMENDOUSLY.

I was taught to gear up the elevate depending on the lure y'all're using. Should be tight enough for the lure to slowly fall to the ground when you lot hit the spool release. This has helped me avoid the dreaded birds nest TREMENDOUSLY.

That's not the elevate

:

disregard and so. Clearly it's been too long since I've been bass fishing...

2 years actually... holy cow. Need to clear my schedule this spring.

I was taught to set the drag depending on the lure you lot're using. Should be tight enough for the lure to slowly autumn to the ground when you hit the spool release. This has helped me avert the dreaded birds nest TREMENDOUSLY.

That'southward spool tension

Setting The Drag - IGFA Video Tutorial

OK allow me endeavor and explain it again. I utilize my foot and hold the line/lure on the basis instead of using a weight. And so I use the aforementioned setting technic as he is using in the tutorial.

Setting the elevate with Marker Sosin and Tommy Greene. Tommy Green explains a uncomplicated way of accurately setting your elevate when fishing. An IGFA video tutorial.

Source: https://forum.gon.com/threads/how-to-set-the-drag-on-a-baitcaster.825487/

Share this post