banner



How To Set Drag On Zebco 33

What is Elevate Fishing?

You've cast your line, lured in a fish, got a bite and set the hook. Yous're now prepare to reel the fish in. The last thing you want to feel during this phase in learning how to fish is a broken line. Near breaks tin can be easily avoided while drag fishing by learning how to set elevate on your line-fishing reel.

What is drag line-fishing? Simply put, if you're using a line-fishing rod and reel setup, as opposed to, say, pole fishing or trawling with a net, yous will most likely adapt the elevate at some point.

The drag is simply a pair of friction plates inside of fishing reels. If the fish pulls on the line hard enough, the friction is overcome, and the reel rotates backwards, letting line out, preventing the line from breaking.  Y'all desire to set the drag on a angling reel earlier your kickoff cast of the twenty-four hour period. Adjusting it while fighting a fish tin be difficult. Also, drag fishing gear is generally not designed to be adapted while fishing, then doing so could crusade damage.

HOW TO SET DRAG ON CONVENTIONAL REELS

  1. The easiest way to set the elevate on a spinning reel or spincast reel is to starting time test information technology past using your hand* to pull on your line straight above the reel.
  2. Tighten the drag on your spinning wheel past turning the front end drag adjustment button a few clicks to the right if the line pulls out as well easily. If it'south likewise tight, loosen the drag by turning the crank a few clicks to the left. Airtight face spincast models usually have a top set roller drag adjustment mechanism.
  3. If you don't feel you tin judge the force accurately, a small bound scale tin help, such as the ones used in Boca Grips or other fish handling devices used in catch and release. Hold your rod at a 45-caste bending and claw the weight. For best results, the elevate setting should be able at the point where the line holds a third to one-half of its weight before moving (e.1000., a 20-pound line should non move until the hook holds seven to 10 pounds).
  4. It's improve to accept your drag too loose and fight a fish a little longer than to have information technology too tight and pause off a big one.

HOW TO Fix Drag ON BAITCASTER REELS

Setting elevate on baitcaster reels follows the aforementioned principals as setting elevate on conventional reels. The only deviation is the location of the drag adjustment machinery.

  1. On most baitcaster reels, the elevate mechanism is star-shaped and located next to the reel. Like the other reels, turn right to tighten the elevate and left to loosen it.
  2. If y'all are fishing with braided fishing line rather than monofilament, yous'll want to test the line by wrapping it a few times effectually the handle of your fishing pliers or a pencil instead of using your bare hands to examination the drag. Braid will slice right into your fingers if y'all pull with too much force.

Once yous've learned how to set drag on a fishing reel, y'all're ready to start casting. Visit hither to learn more nigh how to cast.

Source: https://www.takemefishing.org/how-to-fish/how-to-catch-fish/how-to-set-the-drag/

0 Response to "How To Set Drag On Zebco 33"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel